Is your jade plant shriveling, and you don’t know why? Don’t worry; your plant is still alive. Follow the simple steps in the following lines to bring it back to its normal state.
Jade plants are known for being easy to grow indoors. All you need to provide for this plant is moderate lighting, some fertilizer, and a well-draining environment. But if you don’t give this plant the little care it needs, it might have issues like shriveling and wrinkling.
In the following paragraphs, we’ll go over all the factors that may cause your jade plant to shrivel and give you a quick fix you can implement in each situation. Let’s get started!
Table of Contents
Why Are My Jade Plant Leaves Shriveling?
Jade plants can shrivel for many reasons. One reason is underwatering. Another reason is exposure to extreme direct light. And finally, heat stress can also cause this issue. But other factors can indirectly contribute to this issue, such as using leaf shine products and extreme fertilizers.
Let’s go over each one of these factors separately.
Underwatering
Jade plants are known for being sensitive to excess water. However, like any other species, this plant will need a minimum amount of water. In fact, when you do not provide this plant with enough water, it will start to dry up and stress.
The first sign of an underwatered jade plant is dry soil. After that, the plant will start losing color and become more brittle as it continues to dry up. Finally, the leaves will begin to shrivel.
Solution
If you notice that your jade plant is shriveling because of underwatering, you should immediately put the whole pot into a sink or bucket full of water and let it sit there for a few minutes. This way, the soil will absorb all the needed water and prevent further damage.
This method should be used only when the plant suffers from severe underwatering. Once your jade plant is rescued, you should start watering it only when the top of the soil feels dry using a regular watering can.
Do Jade Plants Like Small Pots? Here Is the Answer
Overwatering
Overwatering a jade plant can also cause it to wilt. In fact, overwatering this plant will cause its roots to become saturated and unable to absorb more water. As a result, the leaves wilt because they can no longer receive water or nutrients from the roots.
Overwatering can also harm plants in other ways. It can cause your plants to rot, which is one of the main enemies of succulents like jade.
Solution
If over-watering is the cause of jade rumples, watering should be stopped immediately. Also, it should be moved to a place with as much sunlight as possible. This way, excess moisture will quickly evaporate.
If the submerged soil is still saturated, the plant should be removed from the pot, and the potting soil changed. In this case, damaged roots should be removed and the pot disinfected before placing the plant back inside. There is.
To learn more about watering a jade plant, check out the following video:
Giving the plant less Light than It Needs
When a jade plant is exposed to too little light, it will wilt and shrink. This is because when it has insufficient light, the plant cannot produce enough chlorophyll(the green pigment that gives the plant its color).
Chlorophyll is necessary for photosynthesis, the process by which plants use light’s energy to produce food.
So, without enough light, there will be less photosynthesis; without photosynthesis, there will be no food for the plant. As a result, it will look shriveled and unhealthy.
Solution
You must water the plant well if low light is the reason behind your shriveling jade plant. After that, you must trim off any dead foliage the plant has lost and gradually expose the plant to extra light.
By gradually exposing your plant to more light, you will help it acclimate, making it respond better to optimum light conditions.
How Many Jade Plants in One Pot? The Answer Might Shock You! Click Here to Learn More.
Exposing the Plant to the Sun for Too Long
Exposing jade plants to the sun for long periods can cause them to lose water through their leaves, and it can be a big problem if it goes on for too long.
So, why does this happen? Well, plants are pretty smart. They have these tiny structures called stomata on their leaves that open and close to regulate the flow of water and gases in and out of the plant. The stomata open up when it’s hot and dry outside to let the water evaporate and cool the plant down. This process is called transpiration.
But if the heat and dryness keep up, the plant can lose more water than it can take in through its roots. And when that happens, the plant starts to wilt and shrivel. The leaves can also turn yellow or brown and begin to drop off.
Solution
One easy thing to do when a plant is exposed to excessive heat is to water it more frequently. This will help it replace the water it’s losing through transpiration. You can also try misting the leaves, adding extra moisture to the air around the plant. Just be careful not to overdo it because too much water can cause its own problems.
Another good idea is to give your plants some shade. This will help them stay cooler and reduce the amount of water they lose through transpiration. You can use a cloth or umbrella to create shade or move the plants to a spot that’s out of direct sunlight for a while.
You can also try adding some mulch around the base of the plant. This will help keep the soil cool and moist, and it will also help suppress weeds.
Did You Know that Jade Plant Can Grow Roots on a Stem? Click Here to Learn More About This.
Using Aggressive Products
Using aggressive products such as leaf-shining products can cause your plants to shrivel. These products contain chemicals, such as sodium and ethylene, that can cause the pores of your plant to clog and stop breathing. As a result, the leaves will start to curl up and lose their natural shape.
Solution
To save a jade plant damaged by leaf-shining products, you need to use a very mild soap, such as dishwashing liquid, and mix it with water to rinse the leaves. Rinse and repeat with a mild soap solution and then with fresh water. Be careful when using soap to clean plants because it should not get in contact with any other part of the plant.
Inadequate Temperatures
The jade plant will most likely shrivel when exposed to extremely high or too-cold temperatures. For example, when it gets freezing, plants can start to freeze. In this case, water expands inside the leaves, and the cell walls can rupture. This can lead to many problems, including wilting, yellowing, and even death.
On the other hand, in extreme heat, plants are exposed to heat stress. Just like us, plants need a specific temperature range to grow. If it gets too hot, the plant can wilt and shrivel. Under such conditions, the leaves may turn yellow or brown and begin to fall off.
Solution
If your jade plant has been exposed to cold temperatures, you must take it somewhere warm. You can put the plant in a sunny spot or place it in a room with AC.
However, if you don’t have access to a sunny spot or AC, you can use grow lights to heat your plant up.
On the other hand, when exposing the jade plant to extreme heat, you should move it to a cooler location. Then, you should remove any dead leaves. It is also crucial to water the plant deeply in this situation because it may be experiencing drought.
Can Jade Plant Grow in Leca and Semi Hydroponics? Here Is the Surprising Truth
Overfertilizing
Have you ever heard the saying “too much of a good thing can be bad”? That definitely holds true when it comes to fertilizing your jade plants. While it’s essential to give your plants the nutrients they need to grow and thrive, over-fertilizing can do more harm than good.
Jade plants do not like being overfed with nutrients. They will only absorb the number of nutrients that they need at any given time, and the rest will remain in the soil and cause problems down the road.
So what happens when you over-fertilize your plants? Well, for one thing, the excess nutrients can build up in the soil and burn the plant’s roots. This can cause the plant to wilt and shrivel and even kill the plant if the damage is severe enough.
But how do you know if you’re over-fertilizing your jade plants? One telltale sign is if the leaves turn yellow or brown and start to drop off. This can signify that the plant is getting too much of certain nutrients, like nitrogen or potassium.
Another sign is if you see a white, crusty residue on the soil surface. This could signify that the fertilizers you’re using are too strong or that you’re applying them too frequently.
Solution
So what can you do to avoid over-fertilizing your plants? One easy thing is to follow the instructions on the fertilizer package. Most fertilizers will have recommended application rates, and sticking to those is essential.
Another good idea is to use a soil test kit to check the nutrient levels in your soil. This will help you better understand what your plants need and how much fertilization they can handle.
Finally, be sure to water your plants regularly, especially after fertilizing. This will help the plants absorb nutrients and prevent them from building up in the soil.
Do You Want to Grow Jade Plant Faster? Check out This Guide
Pest Infestation
Pest infestations can be a significant problem for gardeners and plant lovers. Not only can pests be annoying and gross to deal with, but they can also seriously harm your plants. One way they can do this is by causing the plants to shrivel and wilt.
So how do pests cause jade plants to shrivel? Well, it depends on the type of pest we’re talking about. Some common garden pests, like aphids and spider mites, feed on the sap of plants. When they do this, they can damage the plant’s tissues and cause the leaves to wilt and shrivel.
Other pests, like slugs and snails, can also cause jade plants to shrivel by eating the leaves and stems. This can leave holes in the plant and prevent it from getting the nutrients it needs to grow.
So how do you know if your jade plants have a pest infestation? One way is to look for signs of the pests themselves. Aphids, for example, are small, pear-shaped insects that can often be found on the undersides of leaves. Spider mites are tiny, spider-like creatures that spin webs on the leaves of plants. Slugs and snails are usually pretty easy to spot, leaving slimy trails wherever they go.
Solution
You must take action immediately if you see any of these pests on your plants. Pest infestations can spread quickly; the longer you wait, the more damage they can do.
One way to get rid of pests is by using insecticidal soap or a natural pest repellent. You can also try removing the pests by hand or using physical barriers like copper tape to keep them away from your plants.
It’s also a good idea to keep an eye on your plants and check for signs of pests. This will help you catch infestations early on and nip them in the bud.
Are You Overwatering or Underwatering Your Jade Plant? Click here to get the answer.
Conclusion
There are many reasons a jade plant can shrivel. By identifying the cause, you can take the necessary steps to fix the problem and keep your plant healthy. Remember that providing the right amount of water, light, and nutrients to your jade plant is critical if you want it to grow healthy and thrive.
Alert: Read This Before Using Epsom Salt for Your jade Plants
